New compressor hard to turn by hand

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
brielly
Posts: 18
Read the full article
Joined: Tue Aug 11, 2020 11:26 am

New compressor hard to turn by hand

Post by brielly »

As the title states. I just got a new compressor for my 2001 cherokee but it's pretty much impossible to turn by hand. it does turn smoothly with a socket. My old one easily turns by hand. Is this normal or should I send this one back? Thanks in advance.
brielly
Posts: 18
Joined: Tue Aug 11, 2020 11:26 am

Re: New compressor hard to turn by hand

Post by brielly »

Yes, I verified that it had 3 oz of pag 100 in it.
User avatar
Tim
Site Admin
Posts: 1104
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: New compressor hard to turn by hand

Post by Tim »

What if I say no it's not good?

What if I say it is Normal?

Is it new or rebuilt?

I would contact the supplier. Using the information on the web without discussing it with the supplier. It only causes headaches trying to explain why what was read is not always true.

In general, one would want a fairly tight compressor. Easy to turn compressor, usually means it will not pump well. As piston rings are not sealing well. Different model compressors have more or less resistance based on design.

I would not be overly concerned. But would contact the source and ask them.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
User avatar
Cusser
Preferred Member
Posts: 846
Joined: Sun Apr 24, 2016 6:29 am

Re: New compressor hard to turn by hand

Post by Cusser »

Next time buy from Tim at Arizona Mobile Air !!!

I've bought at least three compressors and an evaporator from Arizona Mobile Air for various vehicles over the past 2.5 decades. And I bought a vacuum pump from them for my work laboratory.
User avatar
Tim
Site Admin
Posts: 1104
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: New compressor hard to turn by hand

Post by Tim »

Cusser wrote:Next time buy from Tim at Arizona Mobile Air !!!
.
While I agree, LOL.

With concerns like this. It's always the best "IMO" to ask your supplier. They know what was sold and if there have been any issues.

I see these types of questions a lot, here, phone or in emails.

What I'm trying to convey. Is if I say the compressor is bad. Because I had issues with a tight compressor. Which I personally bought off eBay or discount house. It could reflect in my response.

Have no issues with the question. But it's important to rely on your vendor
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
Post Reply