Page 1 of 1

Testing with Thermocouples

Posted: Sun Oct 01, 2017 4:46 am
by chuckwp
Are any of you using thermocoupeles for diagnosis? I am considering buying the below tool but, looking for opinions before shelling out $250.
omega.jpg
omega.jpg (8.73 KiB) Viewed 11933 times

Re: Testing with Thermocouples

Posted: Sun Oct 22, 2017 1:57 pm
by bohica2xo
I have been using thermocouples for decades.

No need for an expensive dedicated tool, many newer DVM's will read thermocouples now.

Clamp the t/c down with a zip tie & wrap a shop rag over it to insulate it for best accuracy.

Thermocouples are cheap. If you have a tough time placing one, unplug it after use & secure the connector safely - you may need it again anyway.