Minimum compressor RPM

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Bailey28
Posts: 8
Read the full article
Joined: Tue Apr 03, 2018 6:05 am

Re: Minimum compressor RPM

Post by Bailey28 »

This is how I have the turnbuckle attached. I set the belt tension first. Then preloaded the turnbuckle slightly.

After purchasing the Alan Grove bracket I noticed another bracket I could have bought that has a turnbuckle included but attaches to slightly different points on the head.

I read that Sanden recommends no more than .006" ear deflection due to breakage and leaks. I set up the spacers you see on top with no slack between the ears before tightening the bolt. I had to shim the bottom mount as well with a steel shim that was about .020" to get no play as well when I first installed the compressor.
Attachments
20200718_092953.jpg
20200718_092953.jpg (186.91 KiB) Viewed 3692 times
Bailey28
Posts: 8
Joined: Tue Apr 03, 2018 6:05 am

Re: Minimum compressor RPM

Post by Bailey28 »

I also plan on getting a higher quality turnbuckle in the future.

The turnbuckle you see is an el cheapo from the hardware store and was for experimentation purposes.
User avatar
Tim
Site Admin
Posts: 1104
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: Minimum compressor RPM

Post by Tim »

Stress in that direction is much better, It's the pulling in or pushing the ear out (horizontally ) for no better term.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
Post Reply