1987/1993/1996 Bronco AC upgrade...

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

User avatar
slawson2000
Posts: 34
Read the full article
Joined: Wed Feb 27, 2019 7:30 am

Re: 1987/1993/1996 Bronco AC upgrade...

Post by slawson2000 »

If I replace the valve with a HPCO, I kill two birds with one stone.

What AN fitting would it be to adapt a HPCO?
User avatar
bohica2xo
Preferred Member
Posts: 1170
Joined: Wed May 11, 2016 4:12 pm
Location: Las Vegas, NV

Re: 1987/1993/1996 Bronco AC upgrade...

Post by bohica2xo »

Unscrew that HPCO switch from the adapter & see what the thread & seal size are.
User avatar
slawson2000
Posts: 34
Joined: Wed Feb 27, 2019 7:30 am

Re: 1987/1993/1996 Bronco AC upgrade...

Post by slawson2000 »

The HPCO and HPRV are the same threads. The problem is that this switch is too wide and will not fit behind the compressor. I either need to find one that is narrower or some sort of adapter/spacer that will put the wide part out past the compressor. Does that make sense?
7.jpg
7.jpg (54.08 KiB) Viewed 6104 times
ice-n-tropics
Posts: 157
Joined: Sat Apr 23, 2016 3:40 pm

Re: 1987/1993/1996 Bronco AC upgrade...

Post by ice-n-tropics »

Thanks for Denso patent info. Our patent is 5,857,839
hotrodac
Post Reply