Must I "zero out" manifold gauge set before checking pressure?

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
AltimaGuy
Posts: 1
Read the full article
Joined: Mon Apr 06, 2020 6:45 am

Must I "zero out" manifold gauge set before checking pressure?

Post by AltimaGuy »

I have a manifold gauge set that I used to charge an empty system by weight to factory spec with a refrigerant scale. The manifold gauge set still has some refrigerant/gas in it as I just closed the valves off and hung it up when I was done.

So, do I need to vent/empty the manifold gauge set before checking pressures on this or a different car?

Does the manifold gauge set need to be reading all zeroes anytime I go to check pressure on something going forward?
Dougflas
Posts: 379
Joined: Mon Apr 18, 2016 6:10 pm

Re: Must I "zero out" manifold gauge set before checking pressure?

Post by Dougflas »

Unless you use different manifolds for different refrigerants, yes clear out the gauges and zero them out for accuracy. You should not mix oils either. It is best to have a different set for different refrigerants.
Post Reply