Search found 18 matches
- Tue May 15, 2018 9:40 pm
- Forum: Automotive Air Conditioning Forum
- Topic: 2014 Land Cruiser AC Problem
- Replies: 8
- Views: 7879
Re: 2014 Land Cruiser AC Problem
Do you have gauges? I would be curious to see what pressures you are seeing. Would take a lot of the guess work out. My new thought is simply air flow/condenser efficiency. Low speed = low air flow = higher high side pressures, possibly so high to send a too high pressure signal to the ecu, which in...
- Tue May 15, 2018 8:59 pm
- Forum: Automotive Air Conditioning Forum
- Topic: 2013 Sentra AC problem. Compressor turns on but high pressure = low pressure
- Replies: 5
- Views: 6139
Re: 2013 Sentra AC problem. Compressor turns on but high pressure = low pressure
like cusser said, also make sure you are getting a good connection with your quick connectors on the service ports and that both the knobs on the quick connector are turned fully CLOCKWISE. and make sure both knobs on your manifold gauge set itself are closed when checking pressures. If you look und...
- Tue May 15, 2018 8:52 pm
- Forum: Automotive Air Conditioning Forum
- Topic: 1999 Mack MR688S inefficiency
- Replies: 4
- Views: 6077
Re: 1999 Mack MR688S inefficiency
Is the return line from the evap back to the compressor cold? If so could be a reheating/blend door type issue. Where either the air isn't fully directed over the evap or air is going through the heater core at some point. Make sure if you have a heater core valve its fully shut and not returning ho...
- Sun May 13, 2018 11:59 am
- Forum: Automotive Air Conditioning Forum
- Topic: Don't know how much oil I lost
- Replies: 6
- Views: 8048
Re: Don't know how much oil I lost
call me lazy, but i would eye up how much it lost, add that, plus another ounce or so for good measure. I highly doubt you would have an oil related issue, provided you weigh in the correct amount of charge and everything else is working right. Save your self a ton of work, time, money and frustrati...
- Sat May 12, 2018 8:15 pm
- Forum: Automotive Air Conditioning Forum
- Topic: 2011 Acadia Discharge Hose Replacement
- Replies: 1
- Views: 2622
Re: 2011 Acadia Discharge Hose Replacement
Refrigerant spraying into the interior can only happen if the evaporator or lines going to it has a leak and has ruptured, or if the seals between your expansion valve (txv) and evaporator are leaking. I'm assuming it has a txv on the interior, some cars have it mounted on the engine side of the fir...
- Sat May 12, 2018 7:25 pm
- Forum: Automotive Air Conditioning Forum
- Topic: 2014 Land Cruiser AC Problem
- Replies: 8
- Views: 7879
Re: 2014 Land Cruiser AC Problem
You know how the clutch gets sucked in towards the compressor pulley when the a/c turns on? Try hitting/tapping/pushing it with a broom handle or something towards the pulley, to try to "help it" pull itself in. BE CAREFUL you are poking around with pulleys and belts. I'm thinking you have...
- Thu Aug 31, 2017 5:14 pm
- Forum: Automotive Air Conditioning Forum
- Topic: Honda Accord compressor BLOCK OFF PLATE seal?
- Replies: 1
- Views: 4175
Re: Honda Accord compressor BLOCK OFF PLATE seal?
Just as an update to my own thread-The block off plate pictured has a standard sized o ring sandwiched underneath it, I forgot the size but the all inclusive kit has many that size already included. Its not a special seal or anything so replace it without hesitation!
- Sun Jun 11, 2017 10:52 am
- Forum: Automotive Air Conditioning Forum
- Topic: Honda Accord compressor BLOCK OFF PLATE seal?
- Replies: 1
- Views: 4175
Honda Accord compressor BLOCK OFF PLATE seal?
Hello, Car: 2001 Honda Accord 3.0 coupe 10S17C compressor. I have one of the supposedly "all inclusive" o-ring kits from 4seasons kit # 26744. While I have the system open, I want to replace all the o ring connections under the hood including whatever seal is under the block off plate with...