69 Camaro Back Again from 2007...

Supported By Hecat Inc.
Heat Exchanger Cleaning & Applied Technologies
Forum provided to discuss internal flushing procedures. A/C, Engine Cooling, Trans Oil Coolers, and More. Karl Matis will be your host in this forum.
Archived Forum

Moderators: bohica2xo, Tim, Dougflas, HECAT

jweb47
Posts: 8
Joined: Sat Aug 27, 2016 9:03 am

69 Camaro Back Again from 2007...

Postby jweb47 » Thu Sep 15, 2016 10:29 am

I had a post in 2007 http://www.autoacforum.com/messageview. ... adid=17957 and I'm repairing the system after an apparent compressor failure (stuck internal reed valve suspected) so I'm going to flush the system.
Since this is basically a hybrid system (everything OEM except compressor and condenser) and yes I did use the POA valve set for R134. For some reason I can't find my notes on the quantity of oil I used. Everything will be flushed except for the compressor and drier which of course are new. I plan to use 6 oz. (PAG 46) in the compressor, 3 oz. for the drier/lines but am uncertain about the rest. Can anyone help me on this one? Thanks
User avatar
HECAT
Posts: 14
Joined: Tue Apr 19, 2016 9:04 am

Re: 69 Camaro Back Again from 2007...

Postby HECAT » Thu Sep 15, 2016 10:43 am

I do not have the oil quantity requirement for your system, but I would GUESS it needs about 6-8 ounces of oil. So you may be good with your 9 oz. plan.
Karl Matis
www.hecatinc.com

Please support this Forum
Buy your A/C products at www.ackits.com
jweb47
Posts: 8
Joined: Sat Aug 27, 2016 9:03 am

Re: 69 Camaro Back Again from 2007...

Postby jweb47 » Thu Sep 15, 2016 11:13 am

I'm about to go out to take it all apart and flush so maybe someone will have another recommendation later on before I seal everything. Thanks for your input though. (I seem to recall your user name from years ago)
User avatar
HECAT
Posts: 14
Joined: Tue Apr 19, 2016 9:04 am

Re: 69 Camaro Back Again from 2007...

Postby HECAT » Thu Sep 15, 2016 11:24 am

Yup, been around so long, I thought the "grumpy old man" avatar fit.
Karl Matis
www.hecatinc.com

Please support this Forum
Buy your A/C products at www.ackits.com
jasmyndube
Posts: 1
Joined: Thu Nov 02, 2017 1:06 am

Re: 69 Camaro Back Again from 2007...

Postby jasmyndube » Thu Nov 02, 2017 4:48 am

So you may be good with your 9 oz. plan. Phen375
gusepina
Posts: 1
Joined: Tue Nov 07, 2017 7:19 am

Re: 69 Camaro Back Again from 2007...

Postby gusepina » Tue Nov 07, 2017 7:55 am

HECAT wrote:I do not have the oil quantity requirement for your subito.it
system, but I would GUESS it needs about 6-8 ounces of oil. So you may be good with your 9 oz. plan.


Nobody in forum..
User avatar
HECAT
Posts: 14
Joined: Tue Apr 19, 2016 9:04 am

Re: 69 Camaro Back Again from 2007...

Postby HECAT » Tue Nov 07, 2017 8:06 am

If you have questions ask away, or maybe start a new topic.
Karl Matis
www.hecatinc.com

Please support this Forum
Buy your A/C products at www.ackits.com
Bigdata
Posts: 2
Joined: Fri Feb 23, 2018 5:38 am

Re: 69 Camaro Back Again from 2007...

Postby Bigdata » Fri Feb 23, 2018 5:48 am

start new topic here............
Nice Discussion Is Going on Here.....
Any One Can Start The New Topic.....




PYTHON Training Bangalore
software testing training institutes
Technical Writing Bangalore
web development training institute
User avatar
HECAT
Posts: 14
Joined: Tue Apr 19, 2016 9:04 am

Re: 69 Camaro Back Again from 2007...

Postby HECAT » Fri Feb 23, 2018 7:10 am

Welcome Big, thanks for your comments.

start new topic here............ Yes, if you would like to.
Nice Discussion Is Going on Here..... Not much to discuss, you are responding to a very old post.
Any One Can Start The New Topic..... Sure they can.
Karl Matis
www.hecatinc.com

Please support this Forum
Buy your A/C products at www.ackits.com

Return to “Automotive Flushing Forum”