Page 1 of 1

69 Camaro Back Again from 2007...

Posted: Thu Sep 15, 2016 10:29 am
by jweb47
I had a post in 2007 http://www.autoacforum.com/messageview. ... adid=17957 and I'm repairing the system after an apparent compressor failure (stuck internal reed valve suspected) so I'm going to flush the system.
Since this is basically a hybrid system (everything OEM except compressor and condenser) and yes I did use the POA valve set for R134. For some reason I can't find my notes on the quantity of oil I used. Everything will be flushed except for the compressor and drier which of course are new. I plan to use 6 oz. (PAG 46) in the compressor, 3 oz. for the drier/lines but am uncertain about the rest. Can anyone help me on this one? Thanks

Re: 69 Camaro Back Again from 2007...

Posted: Thu Sep 15, 2016 10:43 am
by HECAT
I do not have the oil quantity requirement for your system, but I would GUESS it needs about 6-8 ounces of oil. So you may be good with your 9 oz. plan.

Re: 69 Camaro Back Again from 2007...

Posted: Thu Sep 15, 2016 11:13 am
by jweb47
I'm about to go out to take it all apart and flush so maybe someone will have another recommendation later on before I seal everything. Thanks for your input though. (I seem to recall your user name from years ago)

Re: 69 Camaro Back Again from 2007...

Posted: Thu Sep 15, 2016 11:24 am
by HECAT
Yup, been around so long, I thought the "grumpy old man" avatar fit.

Re: 69 Camaro Back Again from 2007...

Posted: Tue Nov 07, 2017 8:06 am
by HECAT
If you have questions ask away, or maybe start a new topic.

Re: 69 Camaro Back Again from 2007...

Posted: Fri Feb 23, 2018 7:10 am
by HECAT
Welcome Big, thanks for your comments.

start new topic here............ Yes, if you would like to.
Nice Discussion Is Going on Here..... Not much to discuss, you are responding to a very old post.
Any One Can Start The New Topic..... Sure they can.