testing condenser and evaporator for obstructions/fouling ?

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
Craigs2
Posts: 6
Read the full article
Joined: Tue Jun 06, 2017 4:19 pm

testing condenser and evaporator for obstructions/fouling ?

Post by Craigs2 »

When a system is open for repairs, is there a procedure for testing the condenser and evaporator for obstructions or fouling? For example, measuring how much pressure it takes to produce a certain flow rate? or measuring how much of a vacuum can be pulled with a given cfm pump? I'm thinking this might be possible given the the narrow passages of modern condensers. Except they seem to be so inexpensive that blind replacement of a condenser is more economical than testing first.
User avatar
JohnHere
Preferred Member
Posts: 1192
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: testing condenser and evaporator for obstructions/fouling ?

Post by JohnHere »

Interesting thoughts, but I've never heard of doing that. Normally, an evaporator can leak but doesn't clog because any debris that makes it past the condenser and dryer will stop at the OT screen or TXV.

A condenser definitely can clog with debris shed from a disintegrating compressor. But the condenser (a system's main filter) normally is just replaced, along with the compressor, receiver/dryer or accumulator, and possibly the metering device.

As you suggest, it's done that way for practicality and cost purposes.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to the Forum.
Post Reply