h block removed on evap.side.High side still holding pressure

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
my2monkeys
Posts: 3
Read the full article
Joined: Mon Aug 28, 2017 7:30 pm

h block removed on evap.side.High side still holding pressure

Post by my2monkeys »

89 Jeep Cherokee 4.0

Compressor was 0 psi on low and 100 psi on high at idle. A little freeze on the h block.
Im thinking stuck expansion valve. So I remove lines at evap. to h block with low and high still hooked up.
Only a little pressure coming out onthe high side of block.
Is that a sign of stuck valve?
Post Reply