Search found 110 matches

by Dgreen
Tue Jul 04, 2023 3:48 pm
Forum: Automotive Air Conditioning Forum
Topic: Compressor Won't Run
Replies: 4
Views: 1253

Re: Compressor Won't Run

7 oz is all that would go in. It was 85 degrees out, so system pressure would be 90 or so wouldn't it? Should try to run at least a little.

Wire setup for checking continuity of the coil was pretty sketchy.
by Dgreen
Mon Jul 03, 2023 3:09 pm
Forum: Automotive Air Conditioning Forum
Topic: Compressor Won't Run
Replies: 4
Views: 1253

Compressor Won't Run

2005 Saturn Vue. System was empty when it arrived. It had signs of dye around the high and low connections. No bubbles at connections when I applied nitrogen to the system. Can't find dye anywhere. micron gauge starts to rise when the vacuum pump is turned off. Added dye and 1/4 oz of oil. Vacuumed ...
by Dgreen
Wed Jul 13, 2022 2:50 am
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

Thanks for helping me understand that!
Learn something every day!
by Dgreen
Tue Jul 12, 2022 3:47 am
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

The system moves a lot of air and at 47 vent temp, it does a good job of keeping us cool.

Connections for the gauges are on the compressor. I would call it a long run of hose from there to the evaporator. It’s a cab over and the evaporator is mounted to the roof on the inside of the cab.
by Dgreen
Mon Jul 11, 2022 1:47 pm
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

I wasn’t able too find a leak.
by Dgreen
Mon Jul 11, 2022 3:59 am
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

It is an E1.
by Dgreen
Sun Jul 10, 2022 3:42 pm
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

Didn’t find any debris at the expansion block. Vacuumed for 10 minutes and it went down to 560 microns. Valved off the pump and it continued down to 530. It stayed at 530 for 10 minutes with no rise. Turned the pump back on and ran it for an hour total and it went to 510. Charged it with 5.5 lbs of ...
by Dgreen
Fri Jul 08, 2022 5:01 pm
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

I’ll work on it again Sunday. The evap case is already off so we can look for dye. It won’t be much work to check the inlet.
by Dgreen
Fri Jul 08, 2022 4:23 pm
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

Re: System on Fire Engine

There is a chance, I’m the only one that has worked on it since it was bought in 2003. I’ve done quite a bit off work to it. The most recent was when it had similar symptoms in June of 2018. Changed the expansion valve and dryer. It’s worked until just recently. Has dye in it. No obvious leaks noted...
by Dgreen
Fri Jul 08, 2022 1:58 pm
Forum: Automotive Air Conditioning Forum
Topic: System on Fire Engine
Replies: 14
Views: 3608

System on Fire Engine

This is a truck at work. System reported to not be cooling. Recovered the refrigerant. It had 1.5 lbs. System capacity on the drivers door says 5.5 lbs. low pressure was 2 high side was 200 with the high idle in. Does this point to a leak with a restriction in the system or would those numbers be po...